SM5100B GSM/GPRS modem – useful AT commands

Latest version of this document can be found under source control here on github.

1) Reboot modem

at+cfun=1,1

+SIND: 1

+SIND: 10,”SM”,1,”FD”,1,”LD”,1,”MC”,1,”RC”,1,”ME”,1

+SIND: 11

+SIND: 3

+SIND: 4

OK

2) save settings (whatever can be saved) to non-volatile memory

at&w

3) display error text instead of error code

at+cmee=2

4) enable local echo

ate1

5) date time (which will be incorrect)

check date time:

at+cclk?

+CCLK: “14/03/15,00:12:18”

OK

set date time:
total 17 chars formatted as – “yy/mm/dd, hh:mm:ss”

AT+CCLK=”13/09/20,23:10:10”

minicom trace

6) check misc status flags

at+cind?

+CIND: 0,19,1,0,1,0,0,0

OK

The format is:

+CIND: <battery>, <signal level>, <service>, <sounder>, <message>, <call>,
<roam>, <smsfull>

<Descr> description
– battery Voltage of battery
– signal Strength of signal (0-31)
– service Availability of network (0-1) (value=1 means registered to network)
– sounder Stillness (0-1) (1=mute)
– message Whether receive short messages (0-1)
– call Existence of a call (0-1)
– roam Net status (0-1) (1=roam status)
– smsfull Short message memory storage has become full(1), or memory locations are available(0)

7) display sms in plain text

at+cmgf=1

OK

8) read sms at specified index (0 is invalid)

at+cmgr=1
+CMGR: “REC READ”,0,”+14088494245″,”13/07/26,23:34:24+00″
Hello cellular prowl

OK
at+cmgr=2
+CMGR: “REC UNREAD”,0,”+14088494245″,”13/07/26,23:36:40+00″
Meow meow purrrr

OK

9) delete sms at specified index (1 in this case)

at+cmgd=1,0

OK
at+cmgr=1

+CMS ERROR: Invalid memory index

The format is:

AT+CMGD=<index>[,<DelFlag>]

<index>: index num of chosen memory <mem1>,which should be less than the maximum num item of <mem1>

<DelFlag> description
– 0 Delete an message according to index
– 1 Delete all readed messages
– 2 Delete all readed or sent messages
– 3 Delete all readed or sent or unsent messages
– 4 Delete all messages

10) list all sms

at+cmgl=”ALL”
+CMGL: 2,0,”REC READ”,”+14088494245″,”13/07/26,23:36:40+00″
Meow meow purrrr

OK

11) make a call

atd0123456789

12) hang up a call (ringing or received)

ath

13) answer a call

ata

14) send sms

at+cmgs=”0123456789″

> hello kitty▒
+CMGS: 1

OK

NOTE: That funny character above is ctrl+z; sending ctrl+z is equivalent to sending a single byte with the hex value: 0x1a

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s